W25Q16FWSNIQ

Hình ảnh chỉ để tham khảo

W25Q16FWSNIQ

IC FLASH 16MBIT SPI/QUAD 8SOIC

  • Nhà sản xuất
  • Ông. Phần #W25Q16FWSNIQ
  • Gói
  • Bảng dữ liệu
  • Có sẵn4068

100% gốc & amp; Mới

24 giờ sẵn sàng để vận chuyển

Bảo hành 365 ngày

RFQ & amp; Nhận thêm Giảm giá

Thông số kỹ thuật

Series SpiFlash®
Part Status Obsolete
Base Product Number W25Q16
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 16Mbit
Memory Organization 2M x 8
Memory Interface SPI - Quad I/O, QPI
Clock Frequency 104 MHz
Write Cycle Time - Word, Page 60µs, 3ms
Voltage - Supply 1.65V ~ 1.95V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC
Packaging Tray

Tổng quan

Description

The W25Q16FWSNIQ is Winbond’s 16‑Mbit serial flash memory. It stores firmware and data for embedded systems and is accessed via a SPI-compatible interface (standard SPI; many variants also support Dual/Quad I/O modes).
Key points:
- Density: 16 Mbit (2 MB)
- Voltage: typically 2.7–3.6 V
- Addressing: 3-byte addressing (no 4-byte mode required at this density)
- Speed: fast read up to ~104 MHz; standard read slower
- Organization: 256-byte page program
- Erase: 4 KB sectors and larger blocks (e.g., 64 KB); full-chip erase option in some variants
- Features: write enable/in progress status, hardware write protection via WP#, low‑power modes and deep power‑down
- Package: 8‑pin package (SOP/SOIC or similar); suffix SNIQ denotes specific package/grade
Typical use: storing boot code, firmware updates, or configuration data in microcontroller projects.
Note: exact commands, timing, endurance, and quirks depend on the specific SNIQ variant—check the W25Q16FWSNIQ datasheet for the precise package/temperature grade details.

Features

W25Q16FWSNIQ features (concise):
- 16 Mbit (2 MB) serial flash memory, 3.3V supply (typically 2.7–3.6V).
- 3-byte addressing (no 4-byte needed for this capacity).
- SPI serial interface with support for Standard SPI, Dual SPI, and Quad I/O (QIO) modes.
- Fast read up to high-speed clock (up to ~104 MHz) in supported modes.
- Page program: 256-byte pages.
- Erase types: 4 KB sectors, 64 KB blocks, and chip erase.
- Low-power operation with deep power-down mode.
- Secure features: software/hardware write protection (BP bits, WP# pin), and JEDEC ID support.
- Data retention rated for long-term use; typical endurance on the order of 100k P/E cycles per sector.
- Temperature range: -40°C to +85°C (industrial) variants available.
- Packaging: 8-pin options (SOP/related packages) suitable for compact designs.
Note: Exact features may vary by package/voltage variant; verify against the specific datasheet revision for W25Q16FWSNIQ.

Package

8-pin SOP (SOP-8) surface-mount package.

Pinout

- Pin count: 8 pins (8-pin package, e.g., SOP/SOIC).
- Function: Winbond W25Q16FWSNIQ is a 16-Mbit serial flash memory accessed via a standard SPI interface (CS, SCK, SI, SO) with additional WP# (write protect), HOLD#, VCC, and GND pins for storage of firmware/data.

Manufacturer

- Manufacturer: Winbond Electronics Corp.
- What kind of company: A Taiwanese semiconductor company that designs and manufactures memory ICs (notably NOR/NAND flash and DRAM). It is a global supplier of memory products used in a wide range of electronics.

Application

W25Q16FWSNIQ is a 16-Mbit SPI/NOR flash memory. Common application areas:
- External storage for embedded systems
- Program/boot memory for MCUs/MPUs
- Firmware update storage via SPI/QSPI
- Data logging and buffering for sensors/IoT
- Asset storage (fonts, icons, images) in consumer electronics, routers, set-top boxes
- Small persistent storage for firmware filesystems (e.g., LittleFS/LFS) in constrained devices

Equivalent

Equivalents (16 Mbit SPI NOR flash, similar pinout):
- GD25Q16C (Gigadevice)
- MX25L1606E (Macronix)
- S25FL016K (Spansion/Cypress)
- N25Q016A (Micron)
- IS25LP016D (ISSI)
- P25Q16H (Puya)
Note: verify voltage (2.7–3.6V), package, and timing for true drop-in compatibility.

Vận chuyển

Phương pháp vận chuyển Chúng tôi

cung cấp dịch vụ vận chuyển toàn cầu thông qua DHL, FedEx, TNT, UPS hoặc bất kỳ nhà giao hàng khác mà bạn lựa chọn.


Tham khảo phí vận chuyển (DHL / FedEx):

Hãng DHL: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 2-5 ngày làm việc.

FedEx: Chi phí vận chuyển dao động từ $ 25- $ 40 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

Sản phẩm UPS: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

TNT: Chi phí vận chuyển dao động từ $ 25- $ 65 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

EMS: Chi phí vận chuyển dao động từ $ 30- $ 50 (0,5kg), với thời gian giao hàng ước tính là 7-15 ngày làm việc.

Đăng ký Air Mail: Chi phí vận chuyển là $ 2- $ 4 (0.1kg), với thời gian giao hàng ước tính là 5-20 ngày làm việc.

Thanh toán

Payment Methods

Thời hạn thanh toán là 100% trả trước.

Hiện tại, chúng tôi chỉ chấp nhận các phương thức thanh toán dưới đây:

1. PayPal

2. Thẻ tín dụng / ghi nợ

3. Chuyển dây