TJA1145T/FDJ

Hình ảnh chỉ để tham khảo

TJA1145T/FDJ

IC TRANSCEIVER FULL 1/1 14SO

100% gốc & amp; Mới

24 giờ sẵn sàng để vận chuyển

Bảo hành 365 ngày

RFQ & amp; Nhận thêm Giảm giá

Thông số kỹ thuật

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Last Time Buy
Type Transceiver
Protocol CANbus
NumberofDrivers/Receivers 1/1
Duplex Full
ReceiverHysteresis 200 mV
Voltage-Supply 4.5V ~ 5.5V
OperatingTemperature -40°C ~ 150°C
MountingType Surface Mount
Package/Case 14-SOIC (0.154, 3.90mm Width)

Tổng quan

Description

The TJA1145T/FDJ is a versatile automotive transceiver designed for communication in Controller Area Network (CAN) and Local Interconnect Network (LIN) systems. It operates as a bridge between these two protocols, enabling seamless data exchange in automotive applications. Key features include its ability to support both high-speed CAN and low-speed LIN communication, making it suitable for various vehicle systems, such as body control, powertrain, and infotainment.
The device is optimized for low power consumption, which is critical for battery-operated systems. It also includes built-in protection against fault conditions, ensuring reliable operation in harsh automotive environments. The TJA1145T/FDJ supports advanced functionalities like wake-up from sleep mode, facilitating energy-efficient designs.
Overall, the TJA1145T/FDJ is an essential component for modern vehicles, enhancing connectivity and communication between different electronic control units (ECUs) while maintaining reliability and performance standards.

Features

The TJA1145T/FDJ is a high-speed CAN transceiver designed for automotive and industrial applications. Key features include:
1. Dual CAN Channels: Supports two separate CAN bus lines, allowing for simultaneous communication on two networks.
2. High Data Rate: Capable of operating up to 1 Mbps, suitable for fast data transmission.
3. Low Power Consumption: Features a low-power mode that reduces energy use, enhancing efficiency in battery-operated devices.
4. Wide Supply Voltage Range: Operates within a voltage range of 4.5V to 5.5V, ensuring compatibility with various systems.
5. Robustness: Built to withstand harsh automotive environments, including ESD protection.
6. Thermal Protection: Includes built-in thermal management features to prevent overheating.
7. Compatible with ISO 11898-2: Adheres to the standard for high-speed CAN communications.
Overall, the TJA1145T/FDJ is ideal for applications requiring reliable and efficient CAN communication.

Package

The TJA1145T/FDJ is packaged in a QFN (Quad Flat No-lead) type, specifically a 32-pin QFN package. This compact package design is ideal for applications requiring a small footprint and efficient thermal performance.

Pinout

The TJA1145T/FDJ is a CAN transceiver designed for automotive applications, specifically for communicating over the CAN bus. It features a total of 16 pins.
Key functions of the pins include:
1. Power Supply Pins:
- VIO (Pin 1): I/O voltage for the CAN controller.
- VCC (Pin 2): Supply voltage for the transceiver.
2. CAN Interface Pins:
- TXD (Pin 3): Transmit data from the CAN controller.
- RXD (Pin 4): Receive data to the CAN controller.
- CANH (Pin 5) and CANL (Pin 6): High and low signal lines for CAN bus communication.
3. Mode Control Pins:
- STB (Pin 7): Standby mode control.
- EN (Pin 8): Enable pin for operational modes.

4. Protection and Reference Pins:
- GND (Pins 9, 10): Ground reference.
- NC (Pins 11-16): Not connected.
The TJA1145T/FDJ is optimized for robustness, low power consumption, and high-speed data transmission in vehicle communication networks.

Manufacturer

The TJA1145T/FDJ is manufactured by NXP Semiconductors, a global semiconductor company based in the Netherlands. NXP specializes in designing and producing a wide range of semiconductor solutions, including microcontrollers, processors, and connectivity devices. The company focuses on various applications, such as automotive, industrial, and consumer electronics. NXP is known for its emphasis on innovation and offers products that enhance communication, security, and efficiency in electronic systems. The TJA1145T/FDJ specifically is a CAN transceiver that is commonly used in automotive and industrial applications for reliable communication in Controller Area Network (CAN) systems.

Application

The TJA1145T/FDJ is a CAN (Controller Area Network) transceiver commonly used in automotive applications for in-vehicle networking. It facilitates communication between electronic control units (ECUs) in vehicles, enabling functions such as diagnostics, infotainment, and advanced driver-assistance systems (ADAS). Additionally, it can be utilized in industrial automation, building automation, and other applications requiring robust communication in noisy environments.

Equivalent

The TJA1145T/FDJ is a CAN transceiver designed for automotive applications. Equivalent products include the NXP TJA1054, Texas Instruments ISO1042, and Microchip MCP2551. Be sure to compare specifications such as voltage levels, data rates, and compatibility with your specific application requirements when selecting alternatives.

Vận chuyển

Phương pháp vận chuyển Chúng tôi

cung cấp dịch vụ vận chuyển toàn cầu thông qua DHL, FedEx, TNT, UPS hoặc bất kỳ nhà giao hàng khác mà bạn lựa chọn.


Tham khảo phí vận chuyển (DHL / FedEx):

Hãng DHL: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 2-5 ngày làm việc.

FedEx: Chi phí vận chuyển dao động từ $ 25- $ 40 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

Sản phẩm UPS: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

TNT: Chi phí vận chuyển dao động từ $ 25- $ 65 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

EMS: Chi phí vận chuyển dao động từ $ 30- $ 50 (0,5kg), với thời gian giao hàng ước tính là 7-15 ngày làm việc.

Đăng ký Air Mail: Chi phí vận chuyển là $ 2- $ 4 (0.1kg), với thời gian giao hàng ước tính là 5-20 ngày làm việc.

Thanh toán

Payment Methods

Thời hạn thanh toán là 100% trả trước.

Hiện tại, chúng tôi chỉ chấp nhận các phương thức thanh toán dưới đây:

1. PayPal

2. Thẻ tín dụng / ghi nợ

3. Chuyển dây

Tương tự