STM32L451CET6

Hình ảnh chỉ để tham khảo

STM32L451CET6

IC MCU 32BIT 512KB FLASH 48LQFP

  • Nhà sản xuất
  • Ông. Phần #STM32L451CET6
  • Gói
  • Bảng dữ liệu
  • Có sẵn16860

100% gốc & amp; Mới

24 giờ sẵn sàng để vận chuyển

Bảo hành 365 ngày

RFQ & amp; Nhận thêm Giảm giá

Thông số kỹ thuật

Series STM32L4
Part Status Active
Base Product Number STM32L451
Core Processor ARM® Cortex®-M4
Core Size 32-Bit
Speed 80MHz
Connectivity CANbus, I2C, IrDA, LINbus, QSPI, SAI, SMBus, SPI, UART/USART
Peripherals Brown-out Detect/Reset, DMA, PWM, WDT
Number of I/O 38
Program Memory Size 512KB (512K x 8)
Program Memory Type FLASH
RAM Size 160K x 8
Voltage - Supply (Vcc/Vdd) 1.71V ~ 3.6V
Data Converters A/D 10x12b SAR; D/A 1x12b
Oscillator Type External, Internal
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Supplier Device Package 48-LQFP (7x7)
Package 48-LQFP
Packaging Bulk

Tổng quan

Description

The STM32L451CET6 is a low‑power 32‑bit microcontroller from ST’s STM32L4 family, built around an ARM Cortex‑M4 core with a floating‑point unit and DSP instructions. It targets energy‑efficient embedded applications that need moderate performance.
Key points:
- Core and performance: Cortex‑M4, up to about 80 MHz, with FPU/DSP for signal processing.
- Power efficiency: multiple low‑power modes (sleep/stop/standby) and power/performance scaling for long battery life.
- Memory and package: on‑chip flash (typical mid‑range sizes) and RAM; ET6 suffix denotes the package variant and configuration (check datasheet for exact figures).
- Peripherals: rich mix of timers, ADCs/DACs, comparators, op‑amps, and standard interfaces (USART/UART, SPI, I2C, USB FS; CAN available on some parts).
- Development: supported by STM32CubeMX and HAL/LL drivers; broad ecosystem with evaluation boards and example projects.
Use cases include wearables, sensors, IoT nodes, portable medical devices, and other battery‑powered embedded systems where low power and reliable peripherals are needed. For exact specs, consult the STM32L451CET6 datasheet/reference manual.

Features

STM32L451CET6 is a low‑power MCU from ST’s L4 family. Key features:
- Core: ARM Cortex-M4F with single‑precision FPU and DSP instructions, up to 80 MHz.
- Memory: On‑chip Flash and RAM; exact sizes are variant‑dependent (CET6 in the 48‑pin package typically offers hundreds of KB Flash and tens of KB RAM—check datasheet for exact values).
- Power: Wide operating voltage (approx. 1.65–3.6 V); multiple low‑power modes (Sleep, Stop, Standby); VBAT domain for RTC.
- Peripherals:
- USB Full‑Speed (device/OTG capable)
- Serial interfaces: USART/UART, SPI, I2C
- Analog: 12‑bit ADC with multiple channels; 12‑bit DAC
- Timers: advanced TIM1 plus general‑purpose TIM2–TIM5
- DMA controller and a rich set of GPIOs
- Misc: Real‑time clock/backup domain, watchdogs, and standard debug support (SWD/JTAG).
- Package/Temp: 48‑pin LQFP (ET6) with industrial temperature range (-40 to 85°C).
- Tooling: Supported by STM32Cube HAL/LL libraries and ST‑Link/debug tooling.
Note: exact Flash/RAM counts and peripheral presence can vary by device variant; verify the datasheet for your specific part.

Package

LQFP64 — a 64-pin thin quad flat package.

Pinout

- Pin count: 64 pins (LQFP-64 package)
- Function: 32‑bit ARM Cortex‑M4 microcontroller (STM32L4 family) for low‑power embedded control and peripherals.

Manufacturer

- Manufacturer: STMicroelectronics (ST)
- What kind of company: A multinational semiconductor company (Franco-Italian origin) headquartered in Geneva, Switzerland, designing and manufacturing microcontrollers, sensors, analog and power-management ICs, and other semiconductor products.

Application

STM32L451CET6 is an ultra-low-power MCU suitable for battery-powered or always-on devices. Key application areas:
- Wearables and portable medical/fitness devices
- Battery-powered sensors, data loggers, environmental monitoring
- Industrial sensing, remote telemetry, smart metering
- Smart home/building automation and IoT edge devices
- Handheld instruments and portable measurement tools
- USB-connected peripherals with LCD displays
- Energy-harvesting systems and other long-life applications

Vận chuyển

Phương pháp vận chuyển Chúng tôi

cung cấp dịch vụ vận chuyển toàn cầu thông qua DHL, FedEx, TNT, UPS hoặc bất kỳ nhà giao hàng khác mà bạn lựa chọn.


Tham khảo phí vận chuyển (DHL / FedEx):

Hãng DHL: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 2-5 ngày làm việc.

FedEx: Chi phí vận chuyển dao động từ $ 25- $ 40 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

Sản phẩm UPS: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

TNT: Chi phí vận chuyển dao động từ $ 25- $ 65 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

EMS: Chi phí vận chuyển dao động từ $ 30- $ 50 (0,5kg), với thời gian giao hàng ước tính là 7-15 ngày làm việc.

Đăng ký Air Mail: Chi phí vận chuyển là $ 2- $ 4 (0.1kg), với thời gian giao hàng ước tính là 5-20 ngày làm việc.

Thanh toán

Payment Methods

Thời hạn thanh toán là 100% trả trước.

Hiện tại, chúng tôi chỉ chấp nhận các phương thức thanh toán dưới đây:

1. PayPal

2. Thẻ tín dụng / ghi nợ

3. Chuyển dây