STM32G041K8U6

Hình ảnh chỉ để tham khảo

STM32G041K8U6

IC MCU 32BIT 64KB FLASH 32UFQFPN

100% gốc & amp; Mới

24 giờ sẵn sàng để vận chuyển

Bảo hành 365 ngày

RFQ & amp; Nhận thêm Giảm giá

Thông số kỹ thuật

Supplier STMicroelectronics
Package Tray
Series STM32G0
ProductStatus Active
CoreProcessor ARM® Cortex®-M0+
CoreSize 32-Bit Single-Core
Speed 64MHz
Connectivity I²C, IrDA, LINbus, SPI, UART/USART
Peripherals Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
NumberofI/O 30
ProgramMemorySize 64KB (64K x 8)
ProgramMemoryType FLASH
RAMSize 8K x 8
Voltage-Supply(Vcc/Vdd) 1.7V ~ 3.6V
DataConverters A/D 18x12b
OscillatorType Internal
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 32-UFQFN Exposed Pad

Tổng quan

Description

STM32G041K8U6 is a member of STMicroelectronics’ STM32G0 family. It is a 32‑bit MCU based on the Arm Cortex‑M0+ core, designed for low‑power, cost‑sensitive apps with a good mix of peripherals.
Key points
- Core and speed: Arm Cortex‑M0+ up to about 64 MHz.
- Memory: Flash and RAM sizes depend on the exact package variant; the K8U6 suffix encodes package/grade, so check the datasheet for exact counts.
- Peripherals: GPIO, multiple timers (PWM), ADC (12‑bit), DAC, comparators/operational amplifiers, I2C/SPI/USART, DMA, CRC, and RNG; USB support is variant‑dependent.
- Power and range: operates from a low voltage (typical 2.0–3.6 V) with various low‑power modes.
- Tools and ecosystem: supported by STM32CubeMX/HAL/LL libraries and STM32CubeIDE for development.
Use cases include compact, energy‑efficient sensing, control, and communication tasks in consumer, industrial, and IoT devices. For exact flash/RAM counts, I/O, and features, consult the STM32G041K8U6 datasheet and reference manual.

Features

Here are the key features of STM32G041K8U6 (G041K8 package):
- Core: ARM Cortex-M0+ core, up to 64 MHz
- Memory: up to 128 KB Flash, up to 16 KB RAM
- Power and range: operates from 1.65 to 3.6 V; multiple low-power modes (Sleep/Stop/Standby) with fast wakeup
- Clocking: HSI 16 MHz, optional HSE; PLL to reach system clock up to 64 MHz
- USB: USB 2.0 Full‑Speed device interface
- Connectivity: UART/USART, I2C, SPI, I2S
- Analog: 12-bit ADC with multiple channels
- Timers and safety: general-purpose timers, SysTick, DMA, CRC unit
- Debug/boot: SWD/JTAG debug, built-in bootloader
- Peripherals and footprint: compact package options suitable for low-pin-count designs (K8/U6 family variants)
Note: exact memory size, peripheral counts, and package options may vary by exact device/package; consult the datasheet for the precise configuration of your part.

Package

The STM32G041K8U6 comes in a 64‑pin LQFP package (LQFP-64).

Pinout

- Pin count: 64 pins
- Function: 32-bit microcontroller (ARM Cortex-M0+) from ST’s STM32G0 family (general-purpose embedded MCU).

Manufacturer

- Manufacturer: STMicroelectronics (ST)
- What kind of company: A multinational semiconductor company (an integrated device manufacturer) headquartered in Geneva, Switzerland. It designs and manufactures a broad range of chips, including STM32 microcontrollers, MEMS sensors, analog and power management ICs. It was formed by a merger of Italy’s SGS Microelettronica and France’s Thomson Semiconducteurs in 1987.

Application

- IoT sensor nodes and environmental monitoring
- Battery-powered wearables and portable instruments
- Home automation and smart devices (sensors/controllers)
- USB peripheral and compact consumer electronics
- Small industrial controllers and data acquisition
- Tiny motor control (fans, pumps, actuators)
- Human-machine interfaces with simple displays
- Prototyping, education, and hobby projects

Equivalent

There isn’t a single exact cross‑vendor equivalent for STM32G041K8U6. Closest options:
- Within ST: other STM32G0 devices in the same package with similar flash/RAM (e.g., STM32G041K6U6 family variants).
- Non‑ST cross: Cortex-M0+ MCUs with ~32–64 KB Flash and small RAM, such as Microchip SAM D21/SAMD11, NXP LPC800/LPC82x, Renesas RL78 families.
Use ST’s Cross Reference tool for precise replacements based on peripherals and package.

Vận chuyển

Phương pháp vận chuyển Chúng tôi

cung cấp dịch vụ vận chuyển toàn cầu thông qua DHL, FedEx, TNT, UPS hoặc bất kỳ nhà giao hàng khác mà bạn lựa chọn.


Tham khảo phí vận chuyển (DHL / FedEx):

Hãng DHL: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 2-5 ngày làm việc.

FedEx: Chi phí vận chuyển dao động từ $ 25- $ 40 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

Sản phẩm UPS: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

TNT: Chi phí vận chuyển dao động từ $ 25- $ 65 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

EMS: Chi phí vận chuyển dao động từ $ 30- $ 50 (0,5kg), với thời gian giao hàng ước tính là 7-15 ngày làm việc.

Đăng ký Air Mail: Chi phí vận chuyển là $ 2- $ 4 (0.1kg), với thời gian giao hàng ước tính là 5-20 ngày làm việc.

Thanh toán

Payment Methods

Thời hạn thanh toán là 100% trả trước.

Hiện tại, chúng tôi chỉ chấp nhận các phương thức thanh toán dưới đây:

1. PayPal

2. Thẻ tín dụng / ghi nợ

3. Chuyển dây

Tương tự