MX25L6433FMI-08Q

Hình ảnh chỉ để tham khảo

MX25L6433FMI-08Q

IC FLASH 64MBIT SPI/QUAD 16SOP

  • Nhà sản xuất
  • Ông. Phần #MX25L6433FMI-08Q
  • Gói
  • Bảng dữ liệu
  • Có sẵn8635

100% gốc & amp; Mới

24 giờ sẵn sàng để vận chuyển

Bảo hành 365 ngày

RFQ & amp; Nhận thêm Giảm giá

Thông số kỹ thuật

Series MXSMIO™
Part Status Active
Base Product Number MX25L6433
DigiKey Programmable Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 64Mbit
Memory Organization 8M x 8
Memory Interface SPI - Quad I/O
Clock Frequency 133 MHz
Write Cycle Time - Word, Page 50µs, 1.2ms
Voltage - Supply 2.65V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 16-SOIC (0.295", 7.50mm Width)
Supplier Device Package 16-SOP
Packaging Tube

Tổng quan

Description

The MX25L6433FMI-08Q is a 64Mb (8MB) serial NOR Flash memory chip designed for applications requiring high-density storage. It utilizes a Quad SPI interface, allowing for fast data transfers with read speeds up to 104 MHz. This memory device is organized as 8,192 pages of 256 bytes each and supports various operations, including read, program, and erase.
Key features include a wide voltage range (2.7V to 3.6V), low power consumption, and a support for deep power-down mode, which enhances energy efficiency in battery-powered devices. The MX25L6433FMI-08Q also features a 4KB sector erase capability, making it suitable for applications where selective data updating is necessary, such as firmware storage in embedded systems, consumer electronics, and IoT devices.
With its reliability and performance, the MX25L6433FMI-08Q is commonly used in various applications, including automotive, industrial, and telecommunications, ensuring data integrity and robustness in demanding environments.

Features

The MX25L6433FMI-08Q is a 64M-bit (8M x 8) Serial NOR Flash memory chip with the following key features:
1. Organization: 8 MB capacity, organized as 8M x 8 bits.
2. Interface: SPI (Serial Peripheral Interface) with single, dual, and quad I/O support for high-speed data transfer.
3. Speed: Fast read speeds up to 104 MHz, enabling quick data retrieval.
4. Voltage: Operates on a supply voltage of 2.7V to 3.6V, suitable for low-power applications.
5. Endurance: Offers a high endurance of up to 100,000 program/erase cycles.
6. Data Retention: Retains data for over 20 years at a temperature of 85°C.
7. Packages: Available in various packages including 8-pin SOIC and 16-pin WSON for versatile design integration.
8. Security Features: Supports OTP (One-Time Programmable) and lock-bit options for data protection.
Overall, the MX25L6433FMI-08Q is designed for reliable, high-performance applications in consumer electronics, automotive, and industrial sectors.

Package

The MX25L6433FMI-08Q is offered in a 16-pin SOIC (Small Outline Integrated Circuit) package. This package type is designed for surface mounting and provides a compact form factor suitable for various electronic applications.

Pinout

The MX25L6433FMI-08Q is a serial NOR Flash memory device with a total of 8 pins. The pin count and their respective functions are as follows:
1. GND - Ground connection.
2. VCC - Power supply (typically 2.7V to 3.6V).
3. SCK - Serial clock input for SPI communication.
4. SI - Serial data input (for sending data to the memory).
5. SO - Serial data output (for reading data from the memory).
6. CS# - Chip select input (active low).
7. WP# - Write protect input (active low, used to protect data).
8. HOLD# - Hold input (active low, used to pause communication).
This device supports standard SPI protocol and is typically used in various applications requiring non-volatile storage.

Manufacturer

The MX25L6433FMI-08Q is manufactured by Macronix International Co., Ltd. Macronix is a semiconductor company based in Taiwan that specializes in non-volatile memory products, such as Flash memory and ROM (Read-Only Memory). Founded in 1989, the company is known for its innovative memory solutions used in various applications, including consumer electronics, automotive, and industrial devices. Macronix focuses on providing high-performance memory products, emphasizing reliability and durability, which are critical in many electronic applications. The company's commitment to research and development enables it to remain competitive in the dynamic semiconductor market.

Application

The MX25L6433FMI-08Q is a 64Mb serial NOR flash memory used in various applications, including consumer electronics, automotive systems, industrial automation, and IoT devices. It is ideal for program storage, firmware updates, and data logging due to its fast read speeds, low power consumption, and reliability. Common use cases include boot code storage, configuration settings, and embedded system memory.

Equivalent

The MX25L6433FMI-08Q chip is a 64Mb serial NOR flash memory. Equivalent products include:
1. W25Q64FV (Winbond)
2. M25P64-V (STMicroelectronics)
3. S25FL064P (Cypress/Infineon)
4. AT25DF641A (Microchip)
These alternatives have similar specifications, including memory size and interface type, but it's essential to check compatibility with your specific application.

Vận chuyển

Phương pháp vận chuyển Chúng tôi

cung cấp dịch vụ vận chuyển toàn cầu thông qua DHL, FedEx, TNT, UPS hoặc bất kỳ nhà giao hàng khác mà bạn lựa chọn.


Tham khảo phí vận chuyển (DHL / FedEx):

Hãng DHL: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 2-5 ngày làm việc.

FedEx: Chi phí vận chuyển dao động từ $ 25- $ 40 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

Sản phẩm UPS: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

TNT: Chi phí vận chuyển dao động từ $ 25- $ 65 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

EMS: Chi phí vận chuyển dao động từ $ 30- $ 50 (0,5kg), với thời gian giao hàng ước tính là 7-15 ngày làm việc.

Đăng ký Air Mail: Chi phí vận chuyển là $ 2- $ 4 (0.1kg), với thời gian giao hàng ước tính là 5-20 ngày làm việc.

Thanh toán

Payment Methods

Thời hạn thanh toán là 100% trả trước.

Hiện tại, chúng tôi chỉ chấp nhận các phương thức thanh toán dưới đây:

1. PayPal

2. Thẻ tín dụng / ghi nợ

3. Chuyển dây

Tương tự