LP2951CM-3.3

Hình ảnh chỉ để tham khảo

LP2951CM-3.3

IC REG LIN POS ADJ 100MA 8SOIC

100% gốc & amp; Mới

24 giờ sẵn sàng để vận chuyển

Bảo hành 365 ngày

RFQ & amp; Nhận thêm Giảm giá

Thông số kỹ thuật

Package Tube,Tube
ProductStatus Not For New Designs
OutputConfiguration Positive
OutputType Adjustable (Fixed)
NumberofRegulators 1
Voltage-Input(Max) 30V
Voltage-Output(Min/Fixed) 1.235V (3.3V)
Voltage-Output(Max) 29V
VoltageDropout(Max) 0.6V @ 100mA
Current-Output 100mA
Current-Quiescent(Iq) 120 µA
Current-Supply(Max) 14 mA
ControlFeatures Enable
ProtectionFeatures Over Current, Over Temperature, Short Circuit
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

Tổng quan

Description

The LP2951CM-3.3 is a fixed 3.3V low-dropout regulator (LDO) from the LP2951 family. It provides a regulated 3.3V output from a higher single-supply input with very low quiescent current, making it suitable for battery-powered or micropower electronics.
Key points:
- Fixed output: 3.3V
- Very low quiescent current (micropower operation)
- Output current typically up to ~100 mA
- Low dropout (several hundred millivolts depending on load)
- Protection: short-circuit protection and thermal shutdown
- Input/output capacitors recommended for stability (per datasheet)
Pinout (three pins): Input, Ground, Output (package variant CM). The CM suffix refers to the specific package variant.
Applications:
- Battery-powered microcontroller/embedded projects
- Sensor and portable electronics
- Any single-supply system needing a stable 3.3V rail
Note: For exact electrical specs, recommended capacitor values, and package details, consult the LP2951CM-3.3 datasheet.

Package

TO-92 molded plastic, 3-pin through-hole package.

Pinout

- Pin count: 3 pins
- Function: Fixed 3.3 V low-dropout positive voltage regulator. Pins are Vin (input), GND (ground), and Vout (regulated 3.3 V output). Includes protection features (current limit and thermal shutdown) per the LP2951 family.

Manufacturer

Manufacturer: Texas Instruments (TI). TI is a multinational American semiconductor company that designs and manufactures analog, mixed-signal, and embedded processing integrated circuits.

Application

LP2951CM-3.3 is a fixed 3.3V low-dropout regulator. Applications: power supply for 3.3V digital/mixed-signal logic in battery-powered/portable gear; microcontrollers, DSPs, memories, and ASICs; sensors, RF/transceiver modules; embedded system rails; pre-regulation for analog front-ends; low-quiescent-current rail in portable instrumentation and audio/video gear.

Equivalent

Equivalent 3.3V fixed LDOs you can consider (cross-references; verify pinout and specs):
- LM1117-3.3
- AMS1117-3.3
- LD1117-3.3
- NCP1117-3.3
- TLV1117-3.3
- MCP1700-3.3
- MCP1825S-3.3
- LP2985-3.3
Note: pinouts and quiescent current vary; check datasheets for interchangeability and packaging.

Vận chuyển

Phương pháp vận chuyển Chúng tôi

cung cấp dịch vụ vận chuyển toàn cầu thông qua DHL, FedEx, TNT, UPS hoặc bất kỳ nhà giao hàng khác mà bạn lựa chọn.


Tham khảo phí vận chuyển (DHL / FedEx):

Hãng DHL: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 2-5 ngày làm việc.

FedEx: Chi phí vận chuyển dao động từ $ 25- $ 40 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

Sản phẩm UPS: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

TNT: Chi phí vận chuyển dao động từ $ 25- $ 65 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

EMS: Chi phí vận chuyển dao động từ $ 30- $ 50 (0,5kg), với thời gian giao hàng ước tính là 7-15 ngày làm việc.

Đăng ký Air Mail: Chi phí vận chuyển là $ 2- $ 4 (0.1kg), với thời gian giao hàng ước tính là 5-20 ngày làm việc.

Thanh toán

Payment Methods

Thời hạn thanh toán là 100% trả trước.

Hiện tại, chúng tôi chỉ chấp nhận các phương thức thanh toán dưới đây:

1. PayPal

2. Thẻ tín dụng / ghi nợ

3. Chuyển dây