DS1245Y-70IND+

Hình ảnh chỉ để tham khảo

DS1245Y-70IND+

IC NVSRAM 1MBIT PARALLEL 32EDIP

  • Nhà sản xuất
  • Ông. Phần #DS1245Y-70IND+
  • Gói DIP-32
  • Bảng dữ liệu
  • Có sẵn7848

100% gốc & amp; Mới

24 giờ sẵn sàng để vận chuyển

Bảo hành 365 ngày

RFQ & amp; Nhận thêm Giảm giá

Thông số kỹ thuật

Package Tube
ProductStatus Active
MemoryType Non-Volatile
MemoryFormat NVSRAM
Technology NVSRAM (Non-Volatile SRAM)
MemorySize 1Mb (128K x 8)
MemoryInterface Parallel
WriteCycleTime-WordPage 70ns
AccessTime 70 ns
Voltage-Supply 4.5V ~ 5.5V
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Through Hole
Package/Case 32-DIP Module (0.600, 15.24mm)

Tổng quan

Description

DS1245Y-70IND+ is a battery-backed NVSRAM (non-volatile static RAM) device from Dallas Semiconductor (now Maxim). It combines fast SRAM with an internal energy source to retain memory contents during power loss, providing non-volatile storage without a separate battery module.
Key points:
- 8-bit parallel memory with an on-chip backup supply for data retention when Vcc is lost.
- -70 indicates about 70 ns access time; IND+ denotes industrial temperature range (-40°C to +85°C) and an industrial/robust package.
- Standard 8-bit SRAM-style interface (address lines, data I/O, chip select, output enable, write enable).
- Typically operates from a 5V supply (with backup energy source). Exact capacity and pinout vary by variant—check the datasheet for the specific DS1245Y-70IND+ you’re using.
- Common applications: BIOS/firmware storage, data logging, event recording, and other embedded systems requiring fast access with guaranteed data retention during power outages.
Note: For precise memory size, electrical characteristics, and pin configuration, consult the DS1245Y datasheet.

Features

DS1245Y-70IND+ is a high-speed, battery-backed nonvolatile RAM (NVSRAM) device. Key features:
- Battery-backed NVSRAM: retains data during power loss using an on-board energy source.
- Speed: 70 ns access time (as indicated by the -70 in the part number).
- Capacity: 64K x 8 NVSRAM (variant-dependent; commonly used size for this family).
- Interface: 8-bit parallel data bus with standard SRAM-like control signals (CS, WE, OE).
- Supply: 5V operation; TTL-compatible I/O.
- Temperature: Industrial range (-40°C to +85°C).
- Data retention: typically >10 years without power.
- Endurance: very high write endurance (on the order of 10^12+ cycles typical for NVSRAM).
- Protections: power-fail write protection to preserve data integrity on power loss.
- Packages: available in standard leaded and surface-mount options (e.g., DIP, SOIC).
- Applications: BIOS/firmware storage, embedded systems, high-reliability nonvolatile storage.
Note: exact capacity and package options can vary by specific datasheet revision; DS1245Y-70IND+ denotes the 70 ns, industrial-temp variant.

Package

8-pin DIP (DIP-8) plastic package, industrial temperature range.

Pinout

- Pin count: 70 pins (70IND+ industrial package)
- Function: DS1245Y-70IND+ is a nonvolatile SRAM with an integrated real-time clock (RTC), providing battery-backed RAM with a backup supply/trickle-charge circuit for data retention across power losses.

Manufacturer

- Manufacturer: Dallas Semiconductor (DS).
- What kind of company: A semiconductor company that designs and manufactures integrated circuits, including memory ICs (e.g., non-volatile RAM). Note: Dallas Semiconductor later became part of Maxim Integrated (and subsequently Analog Devices).

Application

Typically used in industrial and embedded systems needing nonvolatile, fast-writing memory that retains data during power loss. Key applications: data logging and archival (sensor data, event logs), parameter/configuration storage for controllers/PLCs, firmware backup and recovery, telecom/network equipment, automotive/telematics edge devices, and portable instrumentation that must survive power interruptions.

Vận chuyển

Phương pháp vận chuyển Chúng tôi

cung cấp dịch vụ vận chuyển toàn cầu thông qua DHL, FedEx, TNT, UPS hoặc bất kỳ nhà giao hàng khác mà bạn lựa chọn.


Tham khảo phí vận chuyển (DHL / FedEx):

Hãng DHL: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 2-5 ngày làm việc.

FedEx: Chi phí vận chuyển dao động từ $ 25- $ 40 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

Sản phẩm UPS: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

TNT: Chi phí vận chuyển dao động từ $ 25- $ 65 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

EMS: Chi phí vận chuyển dao động từ $ 30- $ 50 (0,5kg), với thời gian giao hàng ước tính là 7-15 ngày làm việc.

Đăng ký Air Mail: Chi phí vận chuyển là $ 2- $ 4 (0.1kg), với thời gian giao hàng ước tính là 5-20 ngày làm việc.

Thanh toán

Payment Methods

Thời hạn thanh toán là 100% trả trước.

Hiện tại, chúng tôi chỉ chấp nhận các phương thức thanh toán dưới đây:

1. PayPal

2. Thẻ tín dụng / ghi nợ

3. Chuyển dây