BG96MATEA-128-SGN

Hình ảnh chỉ để tham khảo

BG96MATEA-128-SGN

RF TXRX MOD CELLULAR SMD

  • Nhà sản xuất
  • Ông. Phần #BG96MATEA-128-SGN
  • Gói
  • Bảng dữ liệu
  • Có sẵn6825

100% gốc & amp; Mới

24 giờ sẵn sàng để vận chuyển

Bảo hành 365 ngày

RFQ & amp; Nhận thêm Giảm giá

Thông số kỹ thuật

Supplier Quectel
Package Box
ProductStatus Active
RFFamily/Standard Cellular
Protocol EDGE, GPRS, GSM, HSPA, LTE, UMTS
Frequency 850MHz, 900MHz, 1.8GHz, 1.9GHz
DataRate 375kbps
Power-Output 23dBm
Sensitivity -117dBm
SerialInterfaces ADC, GPIO, I²C, PCM, UART, USB
AntennaType Antenna Not Included
Voltage-Supply 3.3V ~ 4.3V
Current-Receiving 16mA
MountingType Surface Mount
OperatingTemperature -40°C ~ 85°C

Tổng quan

Description

BG96MATEA-128-SGN is a Quectel BG96 multi‑mode cellular module with integrated GNSS, designed for IoT devices requiring cellular connectivity and positioning.
Key points
- Cellular: LTE Cat M1/NB-IoT and GPRS/EDGE for global coverage; supports data, SMS, and circuit-switched services as available.
- GNSS: onboard positioning engine (GPS/GLONASS/BeiDou/Galileo) for outdoor location and tracking.
- Interfaces: UART and USB for control and data, plus SPI/I2C/GPIOs for peripheral integration.
- Protocols: standard AT commands; supports TCP/UDP, HTTP, MQTT, CoAP, TLS/SSL for secure communication.
- Power and sleep: designed for low power with sleep modes (PSM/eDRX) suitable for battery-powered IoT devices.
- Packaging and use: OEM module intended for integration into customer host boards; requires Quectel design guides, AT command reference, and certification resources.
- Applications: asset tracking, remote monitoring, smart metering, wearables, and other IoT deployments needing cellular connectivity with location.
How to start
- Obtain hardware/design guides and AT manual from Quectel.
- Connect via UART/USB, insert SIM, issue AT commands to attach to network, and enable GNSS.

Features

Here are the typical features of BG96MATEA-128-SGN (BG96 family) in concise form:
- Multi-band LTE Cat M1 and Cat NB1/NB-IoT with 2G (EGPRS) fallback for global coverage
- Optional integrated GNSS engine (GPS/GLONASS/BeiDou/Galileo) for standalone positioning
- Data and messaging: TCP/UDP/IP, TLS/DTLS, MQTT/CoAP, HTTP(S); SMS support
- Firmware Over-The-Air (FOTA) updates
- Power management: supports deep-sleep/PSM and eDRX for extended standby
- Interfaces: UART, USB 2.0, SPI, I2C, PWM, ADC; multiple GPIOs
- Security: secure boot, secure storage, hardware crypto acceleration
- Supply and operating range: typical 3.3 V supply (with broad acceptable range); wide operating temperature
- Certifications: GCF/CE/FCC/IC/ROHS and related regulatory approvals
- Software/IP: AT command set for all modem functions; compatible with Quectel tools and SDKs
Note: exact band support, memory/flash sizing, and some I/O counts may vary by production lots or carrier configurations.

Package

LGA (land grid array) 128-pin surface-mount package.

Pinout

BG96MATEA-128-SGN is a 128-pin LGA module. Its pins provide: power (VBAT, VRTC, VREG), multiple grounds, RF/antenna, SIM (VCC/CLK/DATA/RST), GNSS antenna, high‑speed interfaces (USB 2.0 D+/D-), serial ports (UART TX/RX + RTS/CTS), SPI and I2C, SD/MMC/SDIO signals, digital GPIOs, ADC inputs, PWM outputs, PCM/voice/audio signals, control/status lines (PWRKEY, RESET, NETLIGHT), and debug/test pins. For exact pin numbering, electrical characteristics and pin functions refer to Quectel’s official BG96MATEA-128-SGN hardware datasheet/pinout diagram.

Manufacturer

Manufacturer: Quectel Wireless Solutions Co., Ltd.
What kind of company: A Chinese multinational that designs and manufactures wireless cellular IoT modules (LTE-M/NB-IoT, 2G/3G/4G) and GNSS modules, serving global IoT applications.

Application

BG96MATEA-128-SGN is a multi‑mode LTE Cat M1/Cat NB1/EGPRS module for IoT/M2M with extended coverage and low power.
Applications:
- Asset tracking and fleet management
- Smart metering and utility telemetry
- Remote monitoring and automation (industrial/building)
- Smart city and environmental monitoring
- Connected POS, vending, and payment terminals
- Healthcare/medical devices requiring wireless connectivity
- Security and alarm systems
- Agricultural IoT (soil, irrigation, crop monitoring)

Equivalent

Equivalents (LTE Cat‑M1 / NB‑IoT + EGPRS) include: SIMCom SIM7000 series, u‑blox SARA‑R410M (SARA‑R4) series, Sierra Wireless HL7800 series, Telit ME910C (Cat‑M/NB variants), and Fibocom L610 series.

Vận chuyển

Phương pháp vận chuyển Chúng tôi

cung cấp dịch vụ vận chuyển toàn cầu thông qua DHL, FedEx, TNT, UPS hoặc bất kỳ nhà giao hàng khác mà bạn lựa chọn.


Tham khảo phí vận chuyển (DHL / FedEx):

Hãng DHL: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 2-5 ngày làm việc.

FedEx: Chi phí vận chuyển dao động từ $ 25- $ 40 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

Sản phẩm UPS: Chi phí vận chuyển dao động từ $ 25- $ 45 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

TNT: Chi phí vận chuyển dao động từ $ 25- $ 65 (0,5kg), với thời gian giao hàng ước tính là 3-7 ngày làm việc.

EMS: Chi phí vận chuyển dao động từ $ 30- $ 50 (0,5kg), với thời gian giao hàng ước tính là 7-15 ngày làm việc.

Đăng ký Air Mail: Chi phí vận chuyển là $ 2- $ 4 (0.1kg), với thời gian giao hàng ước tính là 5-20 ngày làm việc.

Thanh toán

Payment Methods

Thời hạn thanh toán là 100% trả trước.

Hiện tại, chúng tôi chỉ chấp nhận các phương thức thanh toán dưới đây:

1. PayPal

2. Thẻ tín dụng / ghi nợ

3. Chuyển dây