AT29C010A-12JC

The AT29C010A-12JC is a 1 Mbit (128K x 8) CMOS EEPROM (Electrically Erasable Programmable Read-Only Memory) designed for high-performance applications. It features a 12V programming voltage, making it suitable for various embedded systems and microcontroller applications. With a fast access time of 120 ns, it allows for quick data retrieval, enhancing overall system performance.
This EEPROM supports a flexible architecture with byte-wise or chip-wide programming and erasing capabilities, enabling efficient data management. The device utilizes a standard 32-pin DIP or PLCC package, facilitating easy integration into circuits. It operates over a temperature range of -40°C to +85°C, making it reliable for industrial applications.
Key features include a low power consumption mode, robust data retention of over 10 years, and endurance of up to 1 million write/erase cycles. The AT29C010A-12JC is ideal for firmware storage, configuration settings, and other applications requiring non-volatile memory. Overall, it offers a combination of efficiency, reliability, and ease of use for designers in the embedded systems domain.

The AT29C010A-12JC is a 1 Megabit (128K x 8) EEPROM designed for high-performance applications. Key features include:
- Memory Type: CMOS 1M-bit (128K x 8) EEPROM.
- Access Time: 120 ns for fast read operations.
- Voltage Range: Operates at 4.5V to 5.5V.
- Write/Erase Cycles: Supports up to 100,000 write/erase cycles.
- Programming Method: Byte-by-byte programming with a fast programming time of approximately 10 ms.
- Data Retention: Guaranteed data retention for 20 years.
- Pin Configuration: 32-pin DIP and PLCC packages available.
- Easy Interface: Compatible with standard microcontrollers, simplifying integration into systems.
- Security Features: Includes a hardware reset and a software protection mode to prevent accidental writes.
- Low Power Consumption: Designed for low power operation, making it suitable for battery-operated devices.
Overall, the AT29C010A-12JC is ideal for applications requiring reliable, non-volatile memory with a combination of speed, endurance, and ease of use.

The AT29C010A-12JC is packaged in a 32-pin PLCC (Plastic Leaded Chip Carrier).

The AT29C010A-12JC is a 1 Megabit (128KB) programmable read-only memory (PROM) chip with a pin count of 32 pins.
The primary functions of its pins are as follows:
1. Address Inputs (A0-A16): 17 pins used to select addresses for the memory locations.
2. Data Input/Output (D0-D7): 8 pins for data input and output during read and program operations.
3. Chip Enable (CE): Activates the chip for read or program modes when low.
4. Output Enable (OE): Enables data output when low.
5. Program Enable (PE): Activates programming mode when low.
6. Reset (RESET): Resets the device when high.
7. VCC: Power supply pin, typically +5V.
8. GND: Ground pin.
This configuration allows the AT29C010A to perform memory read, program, and erase operations efficiently.

The manufacturer of the AT29C010A-12JC is Atmel Corporation, which is now a part of Microchip Technology Inc. Atmel was known for designing and manufacturing a wide range of semiconductor products, including microcontrollers, memory devices, and programmable logic devices. The AT29C010A is a 1 Megabit (128K x 8) Electrically Erasable Programmable Read-Only Memory (EEPROM) chip, widely used in embedded systems for its non-volatile storage capabilities. Microchip Technology continues to produce and support Atmel's legacy products, focusing on microcontroller and analog semiconductor solutions for various applications in automotive, industrial, consumer, and other sectors.

The AT29C010A-12JC is a 1 Megabit (128K x 8) EEPROM used in various applications, including programmable logic devices, embedded systems, and consumer electronics. It is commonly found in automotive electronics, telecommunications, industrial controls, and medical devices for storing firmware, configuration data, and custom applications. Its ability to be electrically erased and reprogrammed makes it ideal for devices requiring field updates.

The AT29C010A-12JC is a 1 Mbit (128 KB x 8) CMOS Flash memory chip. Equivalent products include:
1. Am29F010B - AMD
2. M29F010 - STMicroelectronics
3. S29GL010A - Spansion
4. W49F010 - Winbond
5. 29F010 - Micron
Always check specifications for compatibility in specific applications.